This is an electric tankless water heater. It looks a little different than the gas tankless water heater picture I posted earlier.
Category: Home Appliances
-
Tankless water heaters can save money
This is a tankless gas water heater in a 2 year old house. With this type of water heater, water is heated on demand rather than storing hot water in a tank. This type of water heater typically costs less to operate and lasts longer than a traditional storage water heater. Some Arizona builders are now installing tankless water heaters in the new homes they build.
-
Don’t Just Have a Home Inspection, Get a HomeXray!!

What is a HomeXraySM?
A HomeXraySM is a scan of your home using a special infrared thermal imaging camera. This infrared (IR) camera detects very small temperature variations in your home’s components, even in hidden areas such as behind the walls, above the ceiling and beneath the floors. These very minor temperature differences often reveal ‘invisible’ problems which cannot be seen with the naked eye, and would not be found with just a traditional home inspection. Some people refer to this technology as "seeing through walls" or "X-ray Vision". While neither of these analogies are technically correct, in many cases a HomeXraySM can help the Inspector "see" problems that would otherwise not be visible.
Why do I need a HomeXraySM?
A HomeXraySM takes your home inspection to the next level! While a good home inspector can detect a wide variety of problems without "seeing inside the walls", a standard home inspection has limitations because it’s a visual inspection. A HomeXraySM is an inexpensive, non-invasive and non-destructive method of finding hidden problems that would otherwise go undetected. Often times, a HomeXraySM can find a problem in its early stages before there are visible symptoms, making it easier and less expensive to repair. Much like a medical x-ray can help a doctor to diagnose a problem inside your body without doing exploratory surgery, a HomeXraySM is a quick and painless way to find certain types of problems that can be hidden within your home’s walls, floors and ceilings. But even a HomeXraySM has limitations, and it takes much more than a special IR camera to "see through walls". Just like it takes a trained Radiologist to properly interpret your medical x-ray, it takes a trained Thermographer to properly interpret your HomeXraySM. Rest assured that when you order a HomeXraySM from Homewerx, your Inspector is also a trained, experienced and Certified Thermographer.The U.S. Dept. of Energy recommends having an infrared scan done before purchasing a home because even new houses can have defects in their thermal envelopes.

This HomeXraySM of a ceiling reveals an area with no insulation.
What types of problems can a HomeXraySM reveal?
A HomeXraySM can find several different types of hidden problems, including:- Plumbing leaks, moisture intrusion and water damage
- Missing insulation and energy loss
- Heating, cooling and ventilation problems (HVAC), including ductwork leaks
- Roof leaks, structural issues and foundation cracks
- Faulty wiring, breakers and fuses
- Pests such as termites, rats and mice
Is a HomeXraySM part of a Home Inspection?
A HomeXraySM is not included with your home inspection – it’s an additional service. You can order a HomeXraySM by itself, or with a home inspection. You may also choose to have a HomeXraySM of your entire house, or we can do a HomeXraySM of one specific area where you suspect a problem. It’s up to you! Of course, you can save money when you order both a home inspection and a HomeXraySM at the same time!Do I get a report with my HomeXraySM?
Yes! The Inspector also prepares a comprehensive, typewritten report which explains the results of your HomeXraySM and includes several color photos. The report is EASY-TO-READ and understand and contains maintenance advice plus other helpful homeowner information. Reports are usually emailed the next day, but can also be delivered by fax or regular mail.How much does a HomeXraySM cost?
The price of a HomeXraySM depends on several factors: the size of your home, whether you want a HomeXraySM of the entire house or just a certain area, and whether you order your HomeXraySM with a home inspection or by itself. But for a limited time, when you order a home inspection from Homewerx, you can get a HomeXraySM for an additional fee of:ONLY $149.00* (for homes up to 3000 square feet)
This is an introductory offer only and won’t last long… so HURRY!Order your HomeXraySM today!
(480) 503-2611
TOLL FREE: 1-888-THE-WERXBecause an ounce of inspection is worth a pound of repair!
*IMPORTANT NOTE: $149 HomeXraySM offer is good only on homes that are 3000 square feet or smaller, and requires the purchase of a Home Inspection at regular price. The HomeXraySM must be performed at the same time as the Home Inspection or additional trip charges may apply. No other discounts or offers may be used in conjunction with this offer. This price is offered for a limited time only and may end without notice.
-
Swimming Pool Maintenance Takes Time & Money
Even in Arizona, you may not use a swimming pool very much in the winter time. But if you’re considering adding a pool to your home, winter is the slow season for Arizona swimming pool companies and therefore, you may be able to negotiate a better price on a new pool. Whether you add a pool to your existing home or buy a house that already has a pool, below is some information to consider about swimming pool maintenance.
Maintaining a swimming pool takes time and money. Pools consist of many systems; the structure itself, as well as electrical, plumbing & mechanical systems. So there’s alot to maintain including pumps, filters, lights, valves, sometimes a heater and other features. Each pool is different, therefore the exact cost of maintaining your pool will depend on many factors such as the pool’s age, surface area, type of finish, water capacity, type of pump & cleaning system, etc.
STRUCTURE & FINISH
The pool’s structure will usually last many years provided that it’s built right and the finish is properly maintained. The pool’s finish may be plaster, pebble-tec or fiberglass. All three types will require regular brushing, cleaning and chemicals. Algae is a bigger concern with a plaster finish. This is because algae can actually etch the plaster finish, or pit the surface and make it rough. Also, the type of pool matters…a diving pool usually holds a lot more water than a play pool, and therefore it will probably cost more to maintain.COST OF CHEMICALS, ETC.
Properly maintaining the chemical balance of the water is important. If you aren’t sure what to add, you can take a sample of your pool water to the local swimming pool supply store for help. They will test it and tell you what chemicals you need and how much to add. Pool water generally requires more chemical maintenance when the weather gets hotter and the pool is used more frequently.For a pool that does NOT have a chlorinating or soft water system, you’ll have to buy chlorine, acid and other chemicals. The chlorine is by far the most expensive of these chemicals, which will probably cost $200 or more per year (depending on the size of the pool, the amount of water it holds, etc.).
If the pool does have a chlorinating or soft water system, you won’t need to buy the chlorine but you’ll need to buy salt and other chemicals. Also, this type of system is more complex and requires more maintenance.
COST OF FILTERS
There are several different types of filters:
1. Sand filter – probably the cheapest to maintain, as you’ll need to replace the sand from time to time.
2. DE – the ‘DE powder’ (diatemaceous earth) has to be replaced each time the pool is backwashed.
3. Cartridges – these are the most convenient but are also the most expensive to replace.Note: ‘Backwashing‘ is basically cleaning the filter. It’s usually done by connecting a hose to the pool equipment, and then operating a valve that reverses the water flow so that the water pushes the dirt out and drains through the hose (into the street or wherever you put the other end of the hose).
INCREASED COST OF UTILITIES
The water bill will generally be higher for a house with a pool. This is because water has to be added to the pool regularly to make up for evaporation. The water level is usually maintained automatically so you won’t know how much evaporation is actually taking place, but the increase in water usage will be much more noticeable in the hotter months.You’ll also have an increase in your electric use due to the pump running. An average pump might need to run 4-8 hours per day, depending on conditions. It will need to run more in the hotter months and during the Arizona monsoon season. You may also see an increase in your gas or electric cost if you heat your pool. Although Arizona doesn’t get that cold in the winter, even a small pool will usually costs quite a bit to heat.
Before you buy a house in Arizona, you can contact the local electric company, water company, etc. and they will usually give you information about the utility bill on that house for the past 12 months.
BARRIERS
If you have kids, you definitely need to consider a fence. In fact, a fence should be seriously considered even if you don’t have children yourself because your friends, neighbors or relatives might have kids. Many localities have barrier laws requiring not only a fence around the pool, but also self-latching gates and auto-closers on all doors leading to the pool. So be sure to check out and comply with pool barrier laws in your area.MAINTENANCE & OTHER COSTS
Pumps and heaters may require repair/replacement from time to time, but they usually last many years if properly cared for. Some pools have a vacuum system that crawls the pool, while others have in-floor pop-up cleaning systems. Both will need to be repaired/replaced from time to time – the vacuums wear out and the pop-up heads sometimes get broken. They both have their advantages and disadvantages. The in-floor pop-up systems usually cost more when the pool is being built, but can reduce the amount of your time required to keep the pool clean. Vacuums need to be serviced regularly, and they still don’t last forever. When they can’t be repaired, vacuums cost several hundred dollars to replace. But the in-floor pop-ups can be even more expensive to repair if you need more than just a head replacement.TIME INVESTMENT
You should also consider the cost of your time. Think about how much time you’re willing to spend cleaning and maintaining your pool vs. how much time you will spend using your pool.BUYING A HOME WITH A POOL vs. ADDING A POOL
If you’re buying a home that already has a pool, you may have to be less picky about the type of pump, cleaning system and other features the pool has. But financially, it’s usually best to buy a house that already has a pool since the cost of adding a pool is much higher than what it will add to your property value. For example, adding a $25,000 pool might increase the home’s value by $10,000-$15,000. If you do buy a home with a pool, be sure to GET BOTH THE HOME AND THE POOL INSPECTED by a Certified Home Inspector!Adding a pool yourself will cost more, but you can choose whatever options you want. In this case, you should carefully consider which type of pool/cleaning system best fits your budget and your lifestyle.
In short, a swimming pool can be a fun way to escape the Arizona heat and get some exercise. However, pools also take time and money to properly maintain, and they must be properly secured to avoid drowning accidents. So if you’re considering a pool, just be sure you know what you’re getting into!
-
Homeowners Need Inspections Too!
Even when you are not buying or selling a home, you can still benefit from a home inspection in a variety of ways:
- Warranty Inspections – for new homes, before the 1 or 2 year warranty expires
- Annual Home Maintenance Inspections – to find problems early, minimizing repair costs
- Home Energy Tune-uPs – for homeowners who want to save energy
- Termite Inspections – should be performed regularly in Arizona
- Roof Inspections – annually or if you suspect a problem
- Pool & Spa Inspections – annually or if you suspect a problem
- Sewer Inspections – using a video camera, usually to diagnose a problem
- Air Duct Inspections – using a video camera, usually to diagnose a problem
- Radon Testing – when buying or if you suspect a problem
- Lead-based Paint Testing – usually for homes built prior to 1978
- Mold Testing & Indoor Air Quality – when buying or if you suspect a problem
- Water Quality Testing – when buying or if you suspect a problem
- Special Inspections – if you just have a specific problem or concern
- Expert Witness Services – for legal issues with builders, contractors, insurance companies, warranty companies and other parties
We also inspect rental properties:
- Landlord and Investor Inspections – performed regularly while tenants are living in your property
- Renter Inspections – to help renters document existing damage and defects before moving into a rental property
We even do Commercial Inspections!
- Offices
- Retail space
- Apartment complexes
- Other commercial properties
So remember, home inspections are not just for buyers! The longer you have owned your home or plan to own your home, the more important it is to have regular inspections in order to properly maintain your home and avoid costly repairs.
Call for an inspection today!
(480) 503-2611
TOLL FREE: 1-888-THE-WERXOr Schedule Online!
-
Air Conditioner & Heat Pump Warning Signs
As we get into the 100+ degree temperatures, the efficiency of your home’s cooling system becomes of the utmost importance. Your air conditioner or heat pump is usually the most expensive appliance in your home, not only in terms of initial cost, but also when it comes to maintenance cost and energy use.
To maintain comfort in your home and to keep your cooling unit working at peak efficiency, you should:
- have your air conditioner or heat pump serviced annually by a qualified professional
- change your air filters at least once per month (yes – every month!)
- keep at least 90% of all your home’s air vents open to avoid creating a pressure imbalance
- clean any debris or obstructions near the outdoor components of your cooling system to improve cooling efficiency
In many cases, it makes alot of sense financially to replace an older cooling system even if it still works just fine. This is because newer cooling units are much more energy efficient than older ones. Therefore, the money you save in electric bills will pay for the cost of the new unit in a fairly short time. It obviously depends on how long you plan to keep your home. If your air conditioner or heat pump is more than 10 years old and you plan to keep your home for several years, you should definitely consider a newer, more efficient cooling system.
One or more of the warning signs below could indicate that your cooling system may soon be due for repair or replacement:
- Your cooling system makes excessive noise
- Your air conditioner or heat pump turns on and off frequently
- You notice some rooms are colder than desired, or hotter than desired
- Your electricity usage increases
- You notice excessive dust in your home
- Your cooling system requires frequent repair
- Your cooling system is more than 10 years old
Hope this information helps you and your family stay cool this summer. Remember, if you have any type of problem in your home, Homewerx Home Inspections can help! We do homeowner maintenance inspections and special inspections, in addition to many other services.
Call today for more information
or to schedule your inspection!Valleywide (480) 503-2611
Toll free: 1-888-THE-WERX -
Don’t Get Squished By Your Garage Door
One of the most commonly overlooked maintenance items in the home, and a very common safety defect, is the garage door and opener. The garage door assembly is the largest and heaviest moving object in the home. If it is not in good working order and properly adjusted, it can pose a serious safety risk. There are three basic safety features on your garage door that should periodically be tested, ideally once a month.
The first safety feature that should be checked is the safety reverse beam. This light beam should be installed at about 6 inches from the floor, and should reverse the direction of the door when the beam is broken. Be sure to refer to the installation instructions for proper mounting of this important safety feature.
The second safety feature that should be checked is the auto reverse. This feature will reverse the direction of the door should it encounter resistance while in motion (both up and down). This can be tested by placing an object in the path of the door or holding the door while in motion. I prefer the holding method because a faulty auto reverse can do serious damage to the door (usually the top panel will bend or crack where it attaches to the opener). If the opener fails this test, minor adjustments to the sensitivity setting on the opener will often resolve this issue.
The final safety feature on your garage door is the safety or counter balance spring. This spring takes up the weight of the door and should not allow the door to fall when disconnected from the opener. If this spring is damaged or incorrectly adjusted, the door can close with considerable force. Serious injury or death can result if you, a child or a pet is struck by the door. To test the spring, disconnect the door from the opener (while the door is in the closed position), open the door manually and see if it will remain balanced at the half open point. Should your door fail this test, consult a professional to make repairs. Counter balance springs are under tension and can cause serious injury if adjustments are attempted by an amateur.
If you have any questions regarding the operation of your garage door, feel free to call our office at (480) 503-2611.
-
Saving Hot Water Can Save You Money
According to SRP, up to 20% of their average customer’s annual energy usage goes towards producing hot water for every day tasks such as laundry, bathing, cooking and dishwashing. Employing a few simple tips can help you save money while also saving water and energy.
- Identify and repair all leaky water faucets. A slow drip can leak hundreds of gallons of water per year. If it’s a hot water leak, both the water and heating it will cost you money. Be sure to turn off faucets completely and teach your kids to properly turn off faucets.
- Set the thermostat on your water heater to 120 degrees. Lowering the temperature from 140 degrees to 120 degrees can save you up to $7 per month. Setting your water heater thermostat to 120 degrees can also reduce the risk of scalding accidents, which are especially a concern with young children and the elderly.
- If you participate in a peak-hour type program with your electric company, you should consider installing a timer on your water heater. Set the timer in a manner that will prevent the water heater from cycling on during the expensive, on-peak hours.
- Instead of taking baths, take short showers. A bath can use 15-25 gallons of water, while an average 5-minute shower uses less than 10 gallons.
- Consider installing low-flow faucets or aerators in your kitchen and/or bathroom. This can reduce consumption of hot water by up to 35%.
The above figures are based on a typical SRP customer with an electric water heater. However, saving hot water can also save you money if you have a gas water heater!
Source: SRP’s Contact, February 2006

