Air Conditioner on Brand New Home Doesn’t WorkBy Greg Reller / February 22, 2006 Any ideas why this brand new home’s air conditioner does not work? The correct answer will be posted in the ‘Comments‘ next Tuesday, February 28th! Be sure to check back…you can make a ‘Comment‘ below if you think you know the answer!
Angela B. February 22, 2006 at 8:22 am Because one of the screws doesn’t have a wire going to it. Reply
BlogMaster February 28, 2006 at 10:21 am CORRECT ANSWER: The thermostat’s wires were not stripped and are therefore not making proper contact! Reply
Manhattan Air Conditioning Service April 27, 2010 at 2:49 pm It is a little hard to say from only this image. However may be it is correct that one of the wires is not getting connected to the proper screw. Reply
Air Conditioner Installation St. Petersburg June 21, 2010 at 7:55 pm I bet there’s a wire lacking for the RW screw. Reply
Slonek Air Conditioning August 6, 2010 at 1:47 pm I also feel that there is a wire lacking for the RW screw. I think this is a wonderful way to solve things by posting it over the internet. Reply
Because one of the screws doesn’t have a wire going to it.
CORRECT ANSWER: The thermostat’s wires were not stripped and are therefore not making proper contact!
It is a little hard to say from only this image. However may be it is correct that one of the wires is not getting connected to the proper screw.
I bet there’s a wire lacking for the RW screw.
I also feel that there is a wire lacking for the RW screw. I think this is a wonderful way to solve things by posting it over the internet.